0.7/0.8/1/1.2/1.5/1.8/2/3/4/5mm SBS APP Modified Bitumen PE/Aluminum Foil/Sand/Mineral Surface Torch Applied Roofing Felt Root Penetration Resistance Self Adhesive Waterproofing Membrane Roll For China Factory Free Sample

Self-adhesive waterproof membrane is widely used because its self-adhesive formulation makes safe,

Product details

0.7/0.8/1/1.2/1.5/1.8/2/3/4/5mm SBS APP modified bitumen PE/Aluminum foil/Sand/Mineral surface torch applied roofing felt Root Penetration Resistance self adhesive waterproofing membrane roll for China factory free sample

Description

Self-adhesive waterproof membrane is widely used because its self-adhesive formulation makes safe, easy and fast installation. We can supply the followings, self-adhesive bituminous waterproof membrane, self-adhesive bituminous with reinforcement waterproof membrane, self-adhesive pre-laid waterproof membrane, and self-adhesive wet-laid waterproof membrane.

Thickness: 1mm, 1.2mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm.

Width: 1m or be cut into smaller width

Length: 10m, 15m, 20m, 25m

❖ Self-Adhesive Bituminous Waterproof Membrane

Its basement is made from SBS elastomer compound, good road bitumen and adhesion-promoting resins, its upper side is faced with PET Film, PE Film, aluminum foil or silicone-coated film, its bottom side is removable silicone-coated film.

Specification for Self-Adhesive Bituminous Waterproof Membrane


No.ItemsPEPETD


IIIIII
1Tensile PropertyTension N/50mm≥150≥200≥150≥200-

Elongation 

/Max. Tension

≥200%≥30%-

Breaking 

Elongation

≥250%≥150%≥450%
2

Nail Tear

Resistance

≥60N≥110N≥30N≥40N-
3

Heat Resistance

(70℃)

No slipping
4

Low Temperature 

Flexibility

-20℃-30℃-20℃-30℃-20℃
5Impermeability0.2Mpa, 120 Minutes-
6

Peel

Strength

Membranes 

(N/mm)

≥1.0

Aluminium sheet 

(N/mm)

≥1.5
7

Nail Water

Tightness

Pass
8

Oil Permeability

(pieces)

≤2
9Holding Power≥20 Minutes
10Heat AgingTension Retention≥80%

Elongation 

/Max. Tension

≥200%≥30%400%

Low Temperature 

Flexibility

-18℃-28℃-18℃-28℃-18℃

Peel Strength 

Aluminium sheet (N/mm)

≥1.5
11Thermal StabilityAppearanceNo slipping, flowing or dripping
Dimension≤2%


❖ Self-Adhesive Bituminous with Reinforcement Waterproof Membrane

Its base material is polyester felt, dipped and coated with adhesive polymer modified bitumen, its upper side is faced with PE Film, fine sand, mineral granular, aluminum foil or silicone-coated film, its bottom side is removable silicone-coated film.

Specification for Self-Adhesive Bituminous with Reinforcement Waterproof Membrane


No.ItemsIII
1Soluble Substance g/m22.0mm≥1300-
3.0mm≥2100
4.0mm≥2900
2Tensile PropertyTension N/50mm2.0mm≥350-
3.0mm≥450≥600
4.0mm≥450≥800
Elongation /Max. Tension≥30%40%
3Heat Resistance (70℃)No slipping, flowing or dripping
4Low Temperature Flexibility-20℃-30℃
5Impermeability0.3Mpa, 120 Minutes
6Peel StrengthMembranes (N/mm)≥1.0
Aluminium sheet (N/mm)≥1.5
7Nail Water TightnessPass
8Oil Permeability (pieces)≤2
9Holding Power≥15 Minutes
10Heat AgingElongation /Max. Tension≥30%≥40%
Low Temperature Flexibility-18℃-28℃
Peel Strength Aluminium sheet (N/mm)≥1.5
Dimensional Stability≤1.5%≤1.0%
11Self-adhesive Bituminous Peel strength (N/mm)≥1.5


❖ Self-Adhesive Pre-Laid Waterproof Membrane

According to different base materials, it is classified to be self-adhesive pre-laid polyester felt waterproof membrane, self-adhesive pre-laid polymer waterproof membrane.

➤ Self-adhesive Pre-laid Polyester Felt Waterproof Membrane

Its base material is bituminous reinforcement waterproof membrane, both sides are covered with self-adhesive layer, and faced with removable silicone-coated film as isolation layer.

Specification for Self-Adhesive Pre-Laid Waterproof Membrane


No.ItemsPolymerPolyester
1Soluble Substance g/m2-≥2900
2Tensile PropertyTension N/50mm≥500≥800
Film Elongation≥400%-

Elongation 

/Max. Tension

-≥40%
3

Nail Tear 

Resistance

≥400N≥200N
4Impact Resistance

Diameter (10±1)mm, 

no leaking

5Static Load20kg, no leaking
6

Heat Resistance 

(70℃, 120 minutes)

No slipping, flowing 

or dripping

7

Low Temperature 

Flexibility

-25℃-25℃
8

Oil Permeability 

(pieces)

≤2
9

Channeling

Water

0.6Mpa, no channeling 

water

10

Peel Strength

(with Lately Poured Concrete) N/mm

Not Handling≥2.0
Surface with cement powder≥1.5
Surface with sands≥1.5
Ultraviolet Radiation Aging≥1.5
Heat Aging≥1.5
Water Dipping≥1.5


❖ Self-Adhesive Wet-Laid Waterproof Membrane

Its base material is bituminous reinforcement waterproof membrane, one side or both sides are covered with self-adhesive layer, and faced with removable silicone-coated film as isolation layer.

Specification for Self-Adhesive Wet-Laid Waterproof Membrane

No.ItemsPolymerPolyester
IIIIII
1Soluble Substance g/m23.0mm-≥2100
4.0mm
≥2900
2Tensile PropertyTension N/50mm≥150≥200≥400≥600
Elongation /Max. Tension≥30%≥150%≥30%≥40%
3Tear Strength≥12N≥25N≥180N≥300N
4Heat Resistance (70℃, 120 minutes)No slipping, flowing or dripping
5Low Temperature Flexibility-15℃-25℃-15℃-25℃
6Impermeability0.3Mpa, 120 Minutes, no leaking

Product features:

1) Don't need fire, don’t need adhesive glue, environment-friendly; 

2) Excellent adhesive property.it can make waterproof layer be a whole body; 

3) High elongation;

4) Good low temperature felicity property.

Application:

1) Widely used in the industrial and civil building roofing, underground, pool, tunnel, wooden and metal roofing.

2) Specially applied in the chemical factory, garment factory, and granary.

3) Especially used in cold places.

4) Tape used for sealing all construction material surfaces.

Packaging & Shipping

1.Packing with strong wood pallet and covering by shrink film in case of slant.

2.Samples are shipped via International Express such as DHL, UPS, Fedex, TNT, etc.

3.Large quantity would be shipped via sea freight to your local seaport.

4.The delivery time is about 10-15 days after receiving the deposit.

Protection

Waterproofing self-adhesive bitumen membrane must be protected from damaging (by traffic, back filling, etc.) after finished application, it should be protected by a cementitious screed or protection boards. Where a bond with topping is not required, a separator sheet should be used.

Our Services

1.Free sample can be provided to test.

2.Powerful construction technical support.

3.Use pallet shipping to ensure safety transportation.

4.Welcome to visit the factory at any time.  

5.If you order to us, we must promise the quality, if some quality problem happened.



Fuhua, one of the largest China manufacturers and suppliers, now brings you 0.7/0.8/1/1.2/1.5/1.8/2/3/4/5mm sbs app modified bitumen pe/aluminum foil/sand/mineral surface torch applied roofing felt root penetration resistance self adhesive waterproofing membrane roll for china factory free sample from its professional factory. Please rest assured to buy.

Related Products
Feedback

Our Service

We are committed to for telecom operators, such as businesses and consumers to provide competitive ICT solutions and services, and continuously improving customer experience...

Feedback

Contact Us

Address:Taitou Industrial Zone, Shouguang City, Shandong Province, China

Tel: +86-536-5201883

Fax: +86-536-5201883

E-mail: sales@goldenwaterproof.com

CopyRight© Shandong Weifang Fuhua Waterproof Materials Co.,Ltd

Shandong Weifang Fuhua Waterproof Materials Co.,Ltd