Home > News > Content

Sbs/APP Modified Bitumen Waterproof Membrane

Sbs/APP Modified Bitumen Waterproof Membrane Product Detail

Basic Info

  • Type:Roofing and Waterproofing

  • Surface:PE, S, M

  • Thickness:2mm, 3mm, 4mm

  • Base Felt:Py, G

  • Usage:The Waterproofing of Buliding

  • Size:1mx10m, 1mx8m

  • Watertightness:Mpa≥0.3

Sbs/APP Modified Bitumen Waterproof Membrane Product Description

Styrene butadiene styrene(SBS) modified bituminous sheet materials(PE)
Width length weight thickness
1m 10m 28kg/roll 2mm
1m 10m 41kg/roll 3mm
1m 8m 45kg/roll 4mm

Styrene butadiene styrene(SBS)modified bituminous sheet materials with mineral granules(M)
Width length weight thickness
1m 10m 45kg/roll 2mm
1m 8m 47kg/roll 3mm
1m 8m 57kg/roll 4mm
Styrene butadiene styrene(SBS) modified bituminous sheet materials with aluminum foil(Al)
Width length weight thickness
1m 10m 29kg/roll 2mm
1m 10m 42kg/roll 3mm
1m 8m 46kg/roll 4mm
Sbs/APP Modified Bitumen Waterproof Membrane Product Characteristics
Good capacity of anti-aging, anti-acid, and anti-alkali, its service life is 30years.
High tensile strength and elongation which adapts to the contraction or crack of the base.
Good perdurable capacity to climate; Be used in cold(-25° C)environment for long life.
Applied by torch.
Widely applied in roofing, basement, pool, subway etc.
Construction Requirements Basement Treatment
The waterproofing base should be strong smooth, and clean without particles on the surface.
No peeling or cracking shall exist on the surface. The corners of the base shall be made into arcs with a radius of no less than 20mm or triangular. The drain slope, division seam, and air vent shall be carried out and treated according to design requirements. Then brush promer on the foundation until it is dry.

Sbs/APP Modified Bitumen Waterproof Membrane Installation
Place the sheet correctly, fire torch, evenly heat the sheet and foundation, When the surface of the sheet is black and bright with a fusion layer apply the sheet and press it into a solid and flat state. Before the sheet is cool, seal the edge of joints by float. Cautions installation is forbidden during rain, snow, fog, strong wind.
The temperature should be 5-35° C during installation.
All nodes should be reinforced during installation.
Keep away from fire during storage.


Sbs/APP Modified Bitumen Waterproof Membrane.jpg

Our Service

We are committed to for telecom operators, such as businesses and consumers to provide competitive ICT solutions and services, and continuously improving customer experience...


Contact Us

Address:Taitou Industrial Zone, Shouguang City, Shandong Province, China

Tel: +86-536-5201883

Fax: +86-536-5201883


CopyRight© Fuhua Waterproofing Technology Co.,Ltd